TeardownConcept pieces. Generic equipment, not a client's product. Figures are illustrative.

Oilfield concept piecesTeardown

Concept set · Oilfield equipment

Six machines, taken apart on screen.

Each piece is an interactive 3D page built in code. Scroll to cut a machine open and pull it apart, tap a part to read what it does, then work the moving part yourself.

Start with the iron roughneck See all six
A red iron roughneck drawn apart in the air above a drill floor, each part separated from the next.
Still from a Teardown concept film: the iron roughneck, exploded

Pick a machine.

Every page works the same way: scroll to take it apart, then it is your turn.

  1. 01Top driveThe motor that turns the drill string from the top of the rig. Spin the main shaft and slide the washpipe cartridge out sideways.Open
  2. 02Mud gate valveShuts off drilling fluid on the rig floor. Work the gate and see how the seat seals upstream, metal to metal.Open
  3. 03Rotating control deviceSeals around the pipe while it turns. Rotate the pipe and release the latch.Open
  4. 04Valve cover systemA cone lock for a mud pump fluid end. Tighten the cone nut and lift the cover out.Open
  5. 05Iron roughneckSpins and torques pipe connections on the rig floor. Watch it grip and torque, then take it apart.Open
  6. 06MPD chokeMeters flow in managed pressure drilling. Stroke the trim in and out of the orifice.Open

What these are, and are not.

Generic

Part names are plain descriptions. Nothing here is a real catalogue item or a client's product.

Illustrative

Dimensions are rounded and proportions are drawn for explanation. Nothing is a rating or a specification.

Yours next

The same treatment works for a real product, with your own drawings and parts list behind it.