Concept work · built from scratch in Blender
Take it apart.
Then show how it works.
A turbocharger modeled part by part, exploded, cut in half and run on film. A hair salon you can walk through on your phone before you drive there. Every machine and room on this page was made here. None of it is a client project.
ConceptFilm
Turbocharger, taken apart
A generic turbo, built from 43 modeled parts. It spins up, comes apart along its shaft, goes back together, then gets cut in half so you can watch exhaust drive the turbine, the compressor pack air, oil feed the bearings and the wastegate open.
The narration is a computer voice (open-source Kokoro), labeled on the end card. The score and sound effects are synthesized in code. No AI video or images.
Loops · each one cut from the same scene
Five shots you could drop on a product page
Down the inlet
The camera flies into the compressor while the hot side lights up.Compressor wheel
Seven full blades, seven splitters, one macro orbit.Every part, in order
The exploded line-up, orbited.Cut in half
Hatched section faces, flow paths running.Wastegate
The flap swings open and exhaust slips past the wheel.ConceptWalk-through
Walk in before you drive
An upscale salon, built from nothing: herringbone oak, six stations with arched mirrors, a shampoo room, a color bar and a product wall. One continuous move from the door to the back, with two held moments.
Concept salon, not a real business. The paintings are public-domain works from The Met Open Access. The product labels are an invented brand.
Earlier concept work